Installation guide
10
Figure 10 Install the Carrier Card in the Cisco AS5400XM Universal Gateway
Step 4 Align the captive screws with their holes, and seat the card completely.
Step 5 Tighten the two captive screws to secure the carrier card to the chassis. (See Figure 11 and Figure 12.)
Figure 11 Tighten the Captive Screws on the Cisco AS5350XM Universal Gateway
Figure 12 Tighten the Captive Screws on the Cisco AS5400XM Universal Gateway
Step 6 If the carrier card has a blank feature card slot, install a blank cover over the open feature card slot to ensure proper
airflow inside the chassis.
Figure 13 Blank Feature Card Cover
37161
36005
Captive screw
Captive screw
37162
Captive
screw
Captive
screw
36033