Specifications
4-8 Chapter 4: Collaboration
For More Information
For more information about the Cisco AS5350XM Universal Gateway, visit:
http://www.cisco.com/en/US/products/hw/iad/index.html.
The Cisco AS5400XM Universal Gateway offers exceptional capacity in
only two rack units (2RU) and provides voice, fax, and data services on
any port at any time. High-density (up to one CT3 of voice over IP [VoIP]
and two CT3 of time-division multiplexing [TDM] switching), low-power
consumption (as low as 3.5A at 48 VDC per CT3 of G.711), and universal
port digital signal processors (DSPs) make the Cisco AS5400XM Universal Gateways ideal for many network
deployment architectures, especially co-location environments and mega points of presence (POPs).
Ideal for Companies That Need These Features
Key Features
• The Cisco AS5400XM Universal Gateway is ideally suited for service provider and enterprise environments
that require innovative voice, fax, and data services.
• This universal gateway has a 2-rack unit (2RU), CT3-capable universal gateway with hot-swappable cards and
internal redundant power supply.
• This universal gateway offers best-in-class voice, fax, remote access, and session-border-control (SBC)
services.
• The gateway provides concurrent gateway and SBC operation.
Virtual Private Networking
IP Security (IPSec) and policy enforcement (RADIUS or TACACS+) L2TP, Layer 2 Forwarding
(L2F), and generic routing encapsulation (GRE) tunnels
Firewall security and intrusion detection
QoS features (committed access rate [CIR], Random Early Detection [RED], IP Precedence,
policy-based routing)
Session Border Control
H.323 to H.323 (including Cisco Unified Communications Manager); H.323 to SIP (including
Cisco Unified Communications Manager); SIP to SIP (including Cisco Unified Communications
Manager); 1000 concurrent calls with 2000 sessions in flow-through mode
Channelized T1
Robbed-bit signaling; Loop Start; Immediate Start, and Wink Start Protocols
Channelized E1
CAS, PR1, E1 R2, leased line, Frame Relay, G.703, G.704
ISDN Protocols Supported
Sync mode PPP, V.110 at rates up to 38400 bps; Network- and user-side ISDN; NFAS with
backup D-channel; QSIG, Feature Group B, Feature Group D; DoVBS
Modem Protocols
Supported
V.90 or V.92 standard supporting rates of 56000 to 28000 in 1333 bps increments; V.92 Modem
on Hold and Quick Connect; V.44 Compression supporting increased throughput by more than
100 percent for Internet browsing; K56Flex at 56000 to 32000 in 2000-bps increments
ITU-T V34 Annex 12 at 33600 and 31200 bps; ITU-T V.34 at 28800, 26400, 24000, 21600, 19200,
16800, 14400, 12000, 9600, 7200, 4800, or 2400 bps; V.32bis 14400, 12000, 9600, 7200, 4800;
V.32 9600, 4800; V.22bis 2400, 1200; V.21 300; Bell 103, 300; V.22 1200; V.23 1200/75; ITU-T V.42
(including Microcom Networking Protocol [MNP] 2-4 and Link Access Procedure for Modems
[LAPM] error correction; ITU-T V.42bis (1000 nodes) and MNP 5 data compression; Async-
mode PPP
Full Cisco IOS Software
Support
IP Plus and Enterprise Plus feature sets including 3DES and Lawful Intercept images
Console and Auxiliary Ports
Asynchronous serial (RJ-45)
Chassis
Dimensions (H x W x D): 1.75 x 17.5 x 20.5 in.; Weight (fully loaded): 22 lbs. (10 kg)
Memory Information
• Main SDRAM—2 slots, 512 MB default memory, 1 GB max memory
• System Flash—1 slot, 128 MB default memory, 1 GB max memory
Cisco AS5400XM Universal Gateway
Cisco AS5400XM Universal
Gateway
• High density in a small footprint (up to 20 CT1/CE1 or 1 CT3, any codec type, fax protocol or
modem type)
• High-performance voice, fax, data, and SBC services
• Concurrent voice gateway and SBC
• High call rates (up to 20 calls per second)
• Enhanced performance for processor-intensive TCL or VoiceXML scripting for complex voice
services
• T.38 real-time fax relay, T.37 fax store and forward, fax detection, and unified communications