Specifications

Chapter 4: Collaboration 4-57
The Cisco TelePresence 3200 is ideal for large group meetings with many participants in a single location,
connecting to other satellite groups in remote locations. It provides an equal seat at the table for participants for
applications such as operations reviews, status update meetings, quarterly meetings with clients or partners,
executive presentations, or meetings requiring staff to be present.
Specifications
Feature Cisco TelePresence System 3200
Product compatibility
• Cisco TelePresence System 500 with Cisco TelePresence System software 1.4 or later
• Cisco TelePresence System 1000 with Cisco TelePresence System software 1.2 or later
• Cisco TelePresence System 3000 with Cisco TelePresence System software 1.2 or later
• Cisco Unified Communications Manager 6.0 or later
• Cisco TelePresence Multipoint Switch 1.0 or later
• Cisco TelePresence Manager 1.4 or later
Software compatibility
Cisco TelePresence System Software 1.4 or later
Protocols
Cisco Discovery Protocol, SIP, IP, Dynamic Host Configuration Protocol (DHCP), Secure Shell
(SSH) Protocol, 802.1p/q, and Real-Time Transport Protocol (RTP)
Connectivity
Ethernet (1 LAN, RJ-45 connection—100/1000m), internal 4-port Ethernet switch, and high-
definition video connector
Programming interfaces
Web-based user interface; you can configure IP address assignment statically or through the
Cisco TelePresence administrator Web interface
Physical dimensions
(H x W x D)
8 x 24 x 23 feet minimum room dimensions for reduced back-row table configuration (total
room capacity of 14 participants). Dimensions for the 12-person second row table are 8 x 31 x
23 feet.
Note that higher ceilings may be required to mount an optional data display. Contact your Cisco
Authorized Technology Provider (ATP) partner for data display options and mounting options.
Weight
Approximately 2595 lb (1177 kg; freight weight)
Power
8856 W (73.8 A @ 120V to 36.9 A @ 240V maximum)
Video and Audio Specifications
Bandwidth consumption
15.3 Mbps (1080p, best motion handling) or 11.7 Mbps (720p, best motion handling) for IP QoS
connections recommended 19.8Mbs (1080p best) or 16.2Mbs (720p best) when including at
30 fps presentation codec.
Note that the bandwidth recommendations for the Cisco TelePresence 3200 are identical to
those for the Cisco TelePresence 3000.
Video standards
H.264
Video frame rate
30 frames per second using H.264
Data and graphics frame
rate
Graphics sharing at 5 frames per second (standard configuration)
Optional graphics sharing at 30 frames per second using a dedicated presentation codec
Native National Television
Standards Committee
(NTSC)
720p and 1080p
Resolution
1920 x 1080 native
Audio standards
G.711 and AAC-LD (22 kHz)
Audio features
Cisco Dynamic Echo Cancellation for spatial audio
Cisco TelePresence High-
Definition Camera
• CMOS 2/3-inch sensor
• C Mount Lens
• 1080p 30
• Minimum illumination 300 Lux
• Manual focus
Additional Specifications
Firmware upgrades
Downloadable from Cisco Unified Communications Manager
Video network features
Intelligent packet loss recovery of video transmission
Network interface
• 1 LAN or Ethernet (RJ-45); 100/1000 Mbps
• Internal 4-port Ethernet switch with 2 PoE (IEEE 802.3af) ports on codec