Specifications

4-56 Chapter 4: Collaboration
Selected Part Numbers and Ordering Information
For More Information
For more information about the Cisco TelePresence System, visit: http://www.cisco.com/go/telepresence.
For large, distributed organizations striving to thrive and grow in today’s global
virtual economy, the Cisco TelePresence System 3200 brings the power of Cisco
TelePresence technology to larger room venues. Ideal for headquarters sites or
large regional offices, the system allows large teams to meet and collaborate
virtually using the Cisco TelePresence solution when much of the team is in one
physical location. With seating for up to 18 participants in a single room, the
system delivers the same superior video and audio quality as the rest of the
Cisco TelePresence portfolio. Applications for the Cisco TelePresence 3200
include large team meetings, cross-functional team meetings, and training or
classroom events. The solution can now scale to fit your organization’s wide range
of meeting needs today and into the future.
Video and Audio Specifications
Bandwidth consumption
3-9 Mbps (720p) or 9-12 Mbps (1080p) for IP QoS connections recommended; on average, a
Cisco TelePresence System 3000 uses 6-8 Mbps (1080p)
Video standards
H.264
Frame rates
30 frames per second using H.264
Data and graphics frame
rate
Graphics sharing at 5 frames per second (standard configuration)
Optional graphics sharing at 30 frames per second using a dedicated presentation codec
Native National Television
Standards Committee
(NTSC)
720p and 1080p
Resolution
1920 x 1080 Native
Audio standards
G.711 and AAC-LD (22 kHz)
Cisco TelePresence High-
Definition Camera
• CMOS 2/3-inch sensor
• C Mount Lens
• 1080p 30
• Minimum illumination 300 Lux
• Manual focus
Audio features
Cisco Dynamic Echo Cancellation for spatial audio
Additional Specifications
Firmware upgrades
Downloadable from Cisco Unified Communications Manager
Video network features
Intelligent packet loss recovery of video transmission
Network interface
1 LAN or Ethernet (RJ-45); 100/1000 Mbps; Internal 4-port Ethernet switch with 2 PoE (IEEE
802.3af) ports on codec
CTS-3000 Cisco TelePresence System 3000
Power Cords
Select the appropriate power cord option to plug into the wall outlets in the country where the
TelePresence system will be deployed.
Laptop Connectivity
Modules
Select the appropriate connectivity modules based on the country where the TelePresence
system will be deployed. These modules allow participants to plug their laptop PC’s or other
portable electronic devices into power outlets integrated into the system table legs.
Lighting Fixtures
Select the appropriate system lighting fixture based on the region where the TelePresence
system will be deployed. Special lighting fixtures are required for Europe and Japan.
Auxiliary control unit
CTS-LIGHT-CTR—This is an optional control unit that is not required for Cisco TelePresence
System 3000 operation.
Projectors
Projector options are offered to meet country specific regulatory requirements. Select from
standard, Chinese or none.
Presentation Codec
CTS-HFR-COLLAB—This is a chargeable option to add a dedicated presentation codec to
enable high frame rate Auto Collaboration.
Cisco TelePresence System 3200