Specifications

Configuring AppleTalk
Cisco AS5300 Universal Access Server Software Configuration Guide
3-54
• Enter the show apple interface async 1 command:
5300# show apple int async 1
Async1 is up, line protocol is up
AppleTalk port is in client-mode
AppleTalk discarded 3 packets due to input errors
AppleTalk address gleaning is not supported by hardware
AppleTalk route cache is disabled, port down
• You can also set the access server to display events messages for the AppleTalk interface by using
the debug appletalk events command. When done troubleshooting, enter the no debug
appletalk events to turn off the messages.
5300# debug appletalk events
AppleTalk Events debugging is on
*Aug 15:56:06.907: AT: RTMP GC complete (0 PDBs freed, 0 PDBs waiting)
*Aug 15:17:56:06.927: AT: Connected GC complete (0 PDBs freed, 0 PDBs waiting)
• Enter the debug appletalk ? command for a list of the appletalk debug commands:
5300# debug appletalk ?
arp Appletalk address resolution protocol
aurp-connection AURP connection
aurp-packet AURP packets
aurp-update AURP routing updates
domain AppleTalk Domain function
eigrp-all All AT/EIGRP functions
eigrp-external AT/EIGRP external functions
eigrp-hello AT/EIGRP hello functions
eigrp-packet AT/EIGRP packet debugging
eigrp-query AT/EIGRP query functions
eigrp-redistribution AT/EIGRP route redistribution
eigrp-request AT/EIGRP external functions
eigrp-target Appletalk/EIGRP for targeting address
eigrp-update AT/EIGRP update functions
errors Information about errors
events Appletalk special events
fs Appletalk fast-switching
iptalk IPTalk encapsulation and functionality
load-balancing AppleTalk load-balancing
macip MacIP functions
nbp Name Binding Protocol (NBP) functions
packet Per-packet debugging
redistribution Route Redistribution
remap AppleTalk Remap function
responder AppleTalk responder debugging
routing (RTMP&EIGRP) functions
rtmp (RTMP) functions
zip Zone Information Protocol functions