Specifications

viii
Book Title
Appendix A Managing Modems A-1
Monitoring Modems A-2
Configuring Microcom Modems for Monitoring A-2
Configuring MICA Modems for Monitoring A-3
Modem Performance Statistics Commands A-4
Managing Modems A-5
Check Modem Type A-5
Set Modem Event Buffer A-5
Remove Inoperable Modems from Service A-6
Polling Modems A-6
Set Polling Attempts A-6
Set Time Interval between Polls A-6
Poll for Modem Statistics A-6
Troubleshooting Modems A-7
Perform a Modem Startup Test A-7
Test Two Modems Back-to-Back A-7
Hold and Reset a Modem A-8
Disable a Modem from Dial-Up Services A-8
Debug a Modem A-8
Upgrading Modem Code A-9
How to Obtain Modem Code A-9
Important Modem Upgrade Commands A-10
Choosing an Update Strategy A-10
Modem Code Scenarios A-11
Displaying Modem Code Versions A-13
Upgrading Modem Code from the Cisco CCO TFTP Server A-14
Download Modem Code from the Cisco CCO TFTP Server to a Local TFTP Server A-14
Copy the Modem Code File from Local TFTP Server to Modems A-18
Upgrading Modem Code from Diskettes A-21
Copy the Modem Code to Your PC Hard Disk A-21
Copy the Modem Code from Your PC to the Modems A-21
Using the Modem Code Bundled with Cisco IOS Software A-25
Appendix B ROM Monitor B-1
Entering the ROM Monitor Program B-1
ROM Monitor Command Conventions B-1
Command Aliasing B-2
ROM Monitor Commands B-2
Appendix C Using Setup on Cisco IOS Releases 11.2 or 11.3(2)T C-1
Getting Started C-1
Running Setup for Cisco IOS Release 11.2 C-2
Running Setup for Cisco IOS Release 11.3(2)T C-10
Continuing the Setup Script for T1/PRI Cards C-14
Continuing the Setup Script for E1/PRI Cards C-17
Where to Go Next C-23