Specifications

Configuring Modem Pooling
Cisco AS5300 Universal Access Server Software Configuration Guide
3-34
Verify
To verify your modem pooling configuration:
• Enter the show modem-pool command to view information for all modem pools. To view
information for a specific modem pool, enter the show modem-pool name command.
5300# show modem-pool
modem-pool: System-def-Mpool
modems in pool: 119 active conn: 0
0 no free modems in pool
modem-pool: test
modems in pool: 1 active conn: 0
0 no free modems in pool
called_party_number: 1000
0 max-conn exceeded, 0 no free modems in pool
Tips
If you are having trouble:
• Make sure you have not configured the same called party number for multiple pools.
• Make sure you have not placed modems in multiple pools.
4 5300(config-modem-pool)# called number phone #
max-conn number
Specifies the DNIS to be used for this
modem pool. The DNIS string can have
an integer x to indicate a do not care digit
for that position.
The max-conn option specifies the
maximum number of connections
allowed for this DNIS. If you do not
specify a max-conn value, the default
(total number of modems in the pool) is
used.
The max-conn values can range from
one to the total number of modems in the
pool.
5 5300(config-modem-pool)# Ctrl-Z
5300#
Return to enable mode.
Table 3-19 Configuring Modem Pooling (Continued)
Step Command Purpose