Specifications

Index 4 Cisco AS5300 Universal Access Server Software Configuration Guide
modem management
back-to-back testing A-7
check modem type A-5
disable modems A-8
event buffer size A-5
frequency of polls A-6
modem statistics A-6
no modem country mica 3-30
no modem country microcom-hdms A-8
polling attempts A-6
remove inoperable modems A-6
resetting and holding A-8
start up test A-7
statistics commands A-4
uploading modem firmware A-14
modem parameters, setting 3-28
modem poll retry command A-6
modem poll time command A-6
modem pooling
configuring 3-33
max-conn option 3-34
range of modems 3-33
show modem-pool name command 3-34
verifying 3-34
modem shutdown command A-8
modem signaling
configuring 3-24
verifying 3-25, 3-39
modem startup-test command A-7
modem status-poll command A-6
modems
configuring 3-28
debug commands 3-31
debugging A-8
enable all protocols 3-28
enable calls 3-28
enable remote IP users 3-28
number of modem lines 3-28
show line # command 3-30
show line command 3-30
verifying 3-30
MP 3-55
Multichassis Multilink Point-to-Point Protocol 3-55
Multilink PPP 3-55
multiple LANs 3-48
N
NFAS groups, monitoring 3-14
no debug isdn q931 command 3-26
no debug modem csm command 3-20
no debug ppp authentiation command 3-23
no debug ppp negotiation command 3-23
no debug sgbp errors command 3-57
no debug sgbp events command 3-57
no debug vlan packets command 3-49
no debug vpdn command 3-59
no modem country mica command 3-30
no modem country microcom-hdms command A-8
note, description of xiii
number extension table, VoIP 3-39
num-exp command, VoIP 3-39
O
online copy of guide xii
P
PAP authentication, enable 3-24
password
configuring 3-2
show config command 3-2
verifying 3-2
ping command 3-45
power switch location, figure 1-2
ppp authentication command 4-15
PPP multilink, enable 3-24
privileged EXEC mode 4-4
preventing unauthenticated access 4-4
securing access 4-4
R
R2 signaling
ani 3-16
cas custom commands 3-17
configuring 3-16
debug modem csm command 3-20
line signaling options 3-16
show controller e1 command 3-19
timeslots 3-16
tone signaling options 3-16
verifying 3-19
RADIUS server 4-8
AAA facility 4-9
communicating with 4-8
radius-server host command 4-8
radius-server key command 4-8
real-time packet flows, VoIP 3-44
real-time voice traffic
configuring 3-44
tips 3-45
verifying 3-45
related publications xv