Specifications

Running Setup for Cisco IOS Release 11.2
Using Setup on Cisco IOS Releases 11.2 or 11.3(2)T C-7
!
appletalk routing
no decnet routing
ip routing
no clns routing
ipx routing
no vines routing
no xns routing
no apollo routing
no bridge 1
!
line 1 48
speed 115200
flowcontrol hardware
login local
autoselect during-login
autoselect ppp
modem dialin
ip local pool setup_pool 172.20.30.40 172.20.30.88
!
username user password passwd
!
arap network 1 ARA Dialins
line 1 48
arap enable
autoselect arap
!
! Turn off IPX to prevent network conflicts.
interface Ethernet0
no ipx network
interface FastEthernet0
no ipx network
!
interface Ethernet0
ip address 172.21.40.10 255.255.0.0
appletalk address 10.0
appletalk zone etherzone
ipx network 1
no mop enabled
!
interface FastEthernet0
duplex full
speed 100
ip address 172.22.50.10 255.255.0.0
appletalk cable-range 0-0 0.0
appletalk discovery
ipx network 2
no mop enabled
!
Interface Group-Async1
group-range 1 48
ip unnumbered Ethernet0
encapsulation ppp
ppp authentication chap pap
peer default ip address pool setup_pool
ip tcp header-compression passive
async mode interactive
!
isdn switch-type primary-5ess
!
controller T1 0
framing esf
clock source line primary
linecode b8zs