Specifications

Cisco AS5300 Universal Access Server Software Configuration Guide
ROM Monitor Commands
B-6
For example:
rommon 6 > frame 2
Frame 02: FP = 0x02003960 RA = 0x020050ee
at 0x02003968 (fp + 0x08) = 0x02004f8d
at 0x0200396c (fp + 0x0c) = 0x0200f390
at 0x02003970 (fp + 0x10) = 0x02006afc
at 0x02003974 (fp + 0x14) = 0xc0a82983
at 0x02003978 (fp + 0x18) = 0x02003a7e
at 0x0200397c (fp + 0x1c) = 0x02002630
at 0x02003980 (fp + 0x20) = 0x00000000
at 0x02003984 (fp + 0x24) = 0x02000000
at 0x02003988 (fp + 0x28) = 0x0200c4a4
at 0x0200398c (fp + 0x2c) = 0x0200f448
• help—The help command prints a summary of the ROM monitor commands to the console
screen. This is the same output as entering ?.
For example:
rommon 11 > help
alias set up and display alias
boot boot up an external process
confreg configuration register utility
cont continue executing a downloaded image
context display the context of a loaded image
dev list the device table
dir list files in file system
dnld serial download a program module
frame print out a selected stack frame
help monitor builtin command help
history monitor command history
meminfo main memory information
repeat repeat a monitor command
reset system reset
set display the monitor variables
stack produce a stack trace
sync write monitor environment to NVRAM
sysret print out info from last system return
unalias unset an alias
unset unset a monitor variable
xmodem x/y modem download
• history or h—Displays the command history, that is, the last 16 commands executed in the
monitor environment.
• meminfo—Displays the size (in bytes) the starting address, the available range of the main
memory, the starting point and size of packet memory, and the size of nonvolatile memory
(NVRAM).
For example:
rommon 9 > meminfo
Main memory size: 8 MB. Packet memory size: 4 MB
Available main memory starts at 0xa000e001, size 0x7f1fff
Packet memory starts at 0xa8000000
NVRAM size: 0x20000
• repeat [number or string] [count] or r—Repeats the specified command. Without an argument,
repeats the last command. The optional command number (from the history list) or match string
specifies which command to repeat. In the case of the match string, the most recent command to
begin with the specified string will be re-executed. If the string includes spaces, you must define
it using quotes. The count option allows you to repeat the command more than once.