Installation guide

Release Notes

Cisco IOS release notes for all platforms provide up-to-date information about specific Cisco IOS software releases.

You can access these documents at: Cisco Product Documentation > Cisco IOS Software Configuration > Cisco IOS Software

Release you are using > Release Notes

Supporting Documents and Related Documentation

Debug commands and other support documents provide additional information about specific Cisco IOS software releases,

platforms, and applications.

You can access these documents at: Cisco Product Documentation > Cisco IOS Software Configuration > Cisco IOS Software

Release you are using > Supporting Documents or Related Documentation

Additional documents of this type are located at: Cisco Product Documentation > Access Servers & Routers > Access Routers>

Cisco AS5300

Items Included with Cisco AS5300

• Cisco AS5300

• 19- and 24-in. rack-mount brackets

• Rubber feet for desktop installation

• RJ-45-to-DB-9 female DTE adapter (labeled TERMINAL)

• RJ-45-to-DB-25 female DTE adapter (labeled TERMINAL)

• RJ-45-to-DB-25 male DCE adapter (labeled MODEM)

• RJ-45-to-RJ-45 rollover console cable

• ESD–preventive wrist strap

• Carrier removal tool

• Two nylon cable ties

• Two cable tie holders

• Grounding lug

• Power cord

• Quick Start Guide (this document)

• Regulatory Compliance and Safety Information document

• Release Notes for the specific Cisco IOS release installed on the Cisco AS5300

• Documentation CD-ROM and information packet

• Cisco Fast Step CD-ROM

Items Not Included

• Four screws for installing the chassis in a rack

• T1 channel service unit/data service unit (CSU/DSU) or E1 networks terminating unit

• PC (with CD-ROM drive) running terminal emulation software for administrative access

• Modem for remote administrative access

• Ethernet cable (straight-through RJ-45-to-RJ-45)

• 4 T1 cables (straight-through RJ-45-to-RJ-45)

• 4 E1 cables (RJ-45 to E1 network)