Specifications

Configuration Tasks
44
Cisco IOS Release 12.0(3)T
To delete a file from VFC Flash memory, use the following command in privileged EXEC mode:
Erase the VFC Flash Memory
When you upgrade to a later version of VCWare, the new files are stored in VFC Flash, along with
those already stored in VFC Flash memory—the new files do not overwrite existing files.
Consequently, you will eventually need to erase the contents of VFC Flash memory to free VFC
Flash memory space. Erasing VFC Flash memory removes the entire contents stored in Flash
memory, including the default file list and the capability list.
To erase the Flash memory of a specific VFC, use the following command in privileged EXEC
mode:
For more information about VFC management commands, refer to the “Command Reference”
section of this document.
Declarations, Notices, and Network-Related Comments
Notice to Customers In certain countries, use of these products or provision of voice telephony
over the Internet may be prohibited and/or subject to laws, regulations, or licenses, including
requirements applicable to the use of the products under telecommunications and other laws and
regulations; customer must comply with all such applicable laws in the country(ies) where customer
intends to use the product.
Command Purpose
delete file-name vfc slot Deletes a specific file from the Flash memory on
the VFC.
Command Purpose
erase vfc slot Erases the Flash memory on the VFC.