Specifications

Copy Flash Files to the VFC
Voice over IP for the Cisco AS5300 41
Note If the VFC ROM is version 1.1, the image name must end in “.VCW.” If the VFC ROM is
version 1.2, the image name must start with “vcv-.”
Download Software (ROM Monitor Mode)
To download VFC software to the VFC while the VFC is in ROM Monitor mode, perform the
following tasks, beginning in privileged EXEC mode:
After you have completed the preceding tasks, reboot the Cisco AS5300 for these changes to take
effect.
Note The image name must start with “vcw-.”
Copy Flash Files to the VFC
As mentioned, each VFC comes with a single bundled image of VCWare stored in Flash memory.
Voice over IP for the AS5300 offers two different ways to copy new versions of VCWare to the VFC
Flash memory: either by downloading the image from the AS5300 motherboard or by downloading
the VCWare from a TFTP server.
Download VCWare to the VFC from the AS5300 Motherboard
To download the VCWare file from the AS5300 motherboard to VFC Flash memory, use the
following command in privileged EXEC mode:
Step Command Purpose
1 clear vfc slot purge Erase the VFC Flash memory.
2 copy tftp vfc
copy flash vfc
Download the VCWare from a TFTP server into
VFC Flash memory
or
Download the VCWare from the VFC motherboard
into VFC Flash memory.
3 clear vfc slot Reboot the VFC.
4 show vfc slot board Check to see if the VFC is back up in VCWare
mode.
5 show vfc slot directory Verify that VCWare is in the VFC Flash.
6 unbundle vfc slot Unbundle the DSPWare from the VCWare and
configure the default file list and the capability list.
7 show vfc slot directory Verify that the DSPWare has been unbundled.
8 show vfc slot default-list Verify that the default file list has been populated.
9 show vfc slot cap-list Verify that the capability list has been populated.
Command Purpose
copy flash vfc Downloads (copies) the Flash file from the AS5300
motherboard to the Flash memory on the VFC.