Specifications

Configuration Tasks
40
Cisco IOS Release 12.0(3)T
Determine the Number of VFCs
To determine the number of installed VFCs and their location, use the following commands in
privileged EXEC mode:
For each VFC identified and located, perform the tasks described described in the following sections
to upgrade system software on that VFC.
Identify the VFC Mode
To identify the mode (whether VCWare or ROM Monitor), use the following commands in
privileged EXEC mode:
If the mode is VCWARE, the VFC status will be “VCWARE running.” If the mode is ROM Monitor,
the VFC status will be “ROMMON.”
Download Software (VCWare Mode)
To download VFC software to the VFC while the VFC is in VCWare mode, use the following
commands beginning in privileged EXEC mode:
After you have completed the preceding tasks, reboot the Cisco AS5300 for these changes to take
effect.
Command Purpose
show vfc slot directory Determines the number of installed VFCs and their
location.
Command Purpose
show vfc slot board Determines whether you VFC is operating in
VCWare mode or ROM Monitor mode.
Step Command Purpose
1 erase vfc slot Erases the Flash memory.
2 show vfc slot directory Verifies that the VFC Flash memory is indeed
empty.
3 copy tftp vfc
copy flash vfc
Downloads the VCWare from a TFTPBoot server
into VFC Flash memory
or
Downloads the VCWare from the VFC
motherboard into VFC Flash memory.
4 clear vfc slot Reboots the VFC.
5 show vfc slot board Checks to see if the VFC is back up in VCWare
mode.
6 show vfc slot directory Verifies that VCWare is in the VFC Flash.
7 unbundle vfc slot Unbundles the DSPWare from the VCWare and
configures the default file list and the capability list.
8 show vfc slot directory Verifies that the DSPWare has been unbundled.
9 show vfc slot default-list Verifies that the default file list has been populated.
10 show vfc slot cap-list Verifies that the capability list has been populated.