Specifications

Configuration Tasks
38
Cisco IOS Release 12.0(3)T
Configure Voice over IP to Support Microsoft NetMeeting
To configure Voice over IP to support NetMeeting, create a VoIP peer that contains the following
information:
• Session Target—IP address or DNS name of the PC running NetMeeting
• CODEC—G711 U Law or G711 A Law
Configure Microsoft NetMeeting for Voice Over IP
To configure NetMeeting to work with Voice over IP, perform the following steps in the order given:
1 From the Tools menu in the NetMeeting application, select Options. NetMeeting will display the
Options dialog box.
2 Click the Audio tab.
3 Click the Calling a telephone using NetMeeting check box.
4 Enter the IP address of the Cisco AS5300 in the IP address field.
5 Under General, click Advanced.
6 Click the Manually configured compression settings check box.
7 Select the CODEC value CCITT ulaw 8000Hz.
8 Click the Up button until this CODEC value is at the top of the list.
9 Click OK to exit.
Initiate a Call Using Microsoft NetMeeting
To initiate a call using Microsoft NetMeeting, perform the following steps in the order given:
1 Click the Call icon from the NetMeeting application. Microsoft NetMeeting will open the call
dialog box.
2 From the Call dialog box, select call using H.323 gateway.
3 Enter the telephone number in the Address field.
4 Click Call to initiate a call to the Cisco AS5300 from Microsoft NetMeeting.
VFC Management
VFCs come with a single bundled image of VCWare stored in VFC Flash memory. Table 3 shows
the extension types defined for these embedded firmware files.