Specifications

Configuration Tasks
30
Cisco IOS Release 12.0(3)T
Figure 9 Sample VoIP Network
Table 2 shows the peer configuration table for the example illustrated in Figure 4.
Table 2 Peer Configuration Table for Sample Voice Over IP Network
Configure POTS Peers
POTS peers enable incoming calls to be received by a particular telephony device by defining the
call leg characteristics between the telephony device and the Cisco AS5300. To configure a POTS
peer, you need to uniquely identify the peer (by assigning it a unique tag number), associate the peer
with a voice port through which calls will be established, and define the destination telephone
number(s). Under most circumstances, the default values for the remaining dial peer configuration
commands will be sufficient to establish connections.
Commands
Dial Peer
Tag Ext Dest-Pattern Type Session-Target CODEC QoS
Server 1
1 1... +1408555.... POTS
2 2... +1408555.... POTS
3 3... +1408555.... POTS
10 [phone]... VoIP IPV4 10.1.1.2 G.729 Best Effort
Server 2
11 +1408555.... VoIP IPV4 10.1.1.1 G.729 Best Effort
4 4... [phone]... POTS
408 555-2001
408 555-1001
408 555-3001
729 411-5001 729 411-5004
729 411-5002 729 411-5003
Cisco AS5300
Access
Server 1
WAN
WAN
T1 ISDN PRI
T1
ISDN PRI
10.1.1.1
10.1.1.2
IP
cloud
Cisco AS5300
Access Server 2
Voice port 0:D
Voice port
0:D
10351
1:D