QuickSpecs

ProLiant Small Form Factor (SFF) SATA MidLine drive for P2000 G3 Array (24 drive bay) and the D2700 JBOD (25
drive bay)
( NOTE: SFF SATA drives are single ported and therefore do not have a fail-over path intrinsic to their design )
HP 500 GB 3G SATA 7.2K SFF (2.5 inch) MDL HDD 507750-B21
Step 2c - Drive Enclosure Options
P2000 Dual I/O 3.5-inch 12 Drive Enclosure
Rear Panel components
1. Power Indicator 3. Unit Locator 5. SAS Out Port
2. Fault Indicator 4. SAS In Port
Use either disk enclosure with Large or Small Form Factor, single or dual controller array heads. Each ship with two .5m
mini-SAS to mini-SAS cables.
HP StorageWorks P2000 Dual I/O 3.5-inch 12 Drive Disk Enclosure AP843A
HP StorageWorks D2700 Dual I/O 2.5-inch 25 Drive Disk Enclosure AJ941A
HP StorageWorks P2000 Drive Enclosure I/O Module
(Only used in conjunction with the P2000 blank chassis (AP838A) if a single I/O disk
enclosure is desired. No cable included)
AP844A
Step 2c - SAS Cable Options
miniSAS to miniSAS Cables :
Connecting P2000 G3 FC or SAS controller to a JBOD if a longer cable is desired. Also
used for attaching the P2000 G3 SAS host ports to servers
HP Ext miniSAS to miniSAS 2m Cable 407339-B21
QuickSpecs
HP StorageWorks P2000 G3 Modular Smart Array
Systems
Configuration Information
DA - 13551 Worldwide QuickSpecs — Version 14 — 4/1/2011 Page 32