Specifications

22-3
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-5260-01
Chapter 22 Troubleshooting
Checking the Top Panel Indicators
Figure 22-3 Indicators on the 350 Series Access Point (Plastic Case)
Figure 22-4 Indicators on the 350 Series Access Point (Metal Case)
The indicator signals have the following meanings (for additional details refer to Table 22-1):
• The Ethernet indicator signals traffic on the wired LAN. This indicator is normally green when an
Ethernet cable is connected, and blinks green when a packet is received or transmitted over the
Ethernet infrastructure. The indicator is off when the Ethernet cable is not connected.
• The status indicator signals operational status. Steady green indicates that the access point is
associated with at least one wireless client. Blinking green indicates that the access point is
operating normally but is not associated with any wireless devices.
• The radio indicator blinks green to indicate radio traffic activity. The light is normally off, but it
blinks whenever a packet is received or transmitted over the access point’s radio.
S
CISCO AIRONET 350 SERIES
WIRELESS ACCESS POINT
Ethernet
Status
Radio
49075
60511
CISCO AIRONET 350 SERIES
WIRELESS ACCESS POINT
ETHERNET ACTIVITY
ASSOCIATION STATUS
RADIO ACTIVITY
Ethernet
Status
Radio