Specifications

11-23
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-5260-01
Chapter 11 Configuring WDS, Fast Secure Roaming, and Radio Management
Configuring Radio Management
Configuring Radio Management
When you configure access points on your wireless LAN to use WDS, the access points automatically
play a role in radio management when they interact with the WDS device. To complete the radio
management configuration, you configure the WDS device to interact with the WLSE device on your
network.
Follow these steps to enable radio management on an access point configured as a WDS device:
Step 1 Browse to the Wireless Services Summary page. Figure 11-15 shows the Wireless Services Summary
page.
Figure 11-15 Wireless Services Summary Page
Step 2
Click WDS to browse to the General Setup page.
Step 3 On the WDS/WNM Summary page, click Settings to browse to the General Setup page. Figure 11-16
shows the General Setup page.