Specifications

11-22
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-5260-01
Chapter 11 Configuring WDS, Fast Secure Roaming, and Radio Management
Configuring WDS and Fast Secure Roaming
Using Debug Messages
In privileged exec mode, use these debug commands to control the display of debug messages for devices
interacting with the WDS device:
Command Description
debug wlccp ap
{mn | wds-discovery | state}
Use this command to turn on display of debug messages related
to client devices (mn), the WDS discovery process, and access
point authentication to the WDS device (state).
debug wlccp dump Use this command to perform a dump of WLCCP packets
received and sent in binary format.
debug wlccp packet Use this command to turn on display of packets to and from the
WDS device.
debug wlccp wds [aggregator |
authenticator | nm | state |
statistics]
Use this command and its options to turn on display of WDS
debug messages. Use the statistics option to turn on display of
failure statistics.
debug wlccp wds authenticator
{all | dispatcher | mac-authen |
process | rxdata | state-machine |
txdata}
Use this command and its options to turn on display of WDS
debug messages related to authentication.