Specifications

10-18
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-5260-01
Chapter 10 Configuring Authentication Types
Matching Access Point and Client Device Authentication Types
EAP-FAST authentication
with WPA
Enable EAP-FAST and Wi-Fi
Protected Access (WPA) and
enable automatic provisioning or
import a PAC file.
To allow the client to associate to
both WPA and non-WPA access
points, enable Allow Association to
both WPA and non-WPA
authenticators.
Select a cipher suite that includes
TKIP, set up and enable WEP, and
enable Network-EAP and WPA for
the SSID.
Note To allow both WPA and
non-WPA clients to use the
SSID, enable optional
WPA.
802.1x authentication and
CCKM
Enable LEAP Select a cipher suite and enable
Network-EAP and CCKM for the
SSID
Note To allow both 802.1x
clients and non-802.1x
clients to use the SSID,
enable optional CCKM.
802.1x authentication and
WPA
Enable any 802.1x authentication
method
Select a cipher suite and enable
Open authentication and WPA for
the SSID (you can also enable
Network-EAP authentication in
addition to or instead of Open
authentication)
Note To allow both WPA clients
and non-WPA clients to use
the SSID, enable optional
WPA.
802.1x authentication and
WPA-PSK
Enable any 802.1x authentication
method
Select a cipher suite and enable
Open authentication and WPA for
the SSID (you can also enable
Network-EAP authentication in
addition to or instead of Open
authentication). Enter a WPA
pre-shared key.
Note To allow both WPA clients
and non-WPA clients to use
the SSID, enable optional
WPA.
Table 10-3 Client and Access Point Security Settings (continued)
Security Feature Client Setting Access Point Setting