Specifications

Contents
xiv
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-5260-01
Enabling and Disabling Sequence Numbers in Log Messages 21-6
Defining the Message Severity Level 21-7
Limiting Syslog Messages Sent to the History Table and to SNMP 21-8
Setting a Logging Rate Limit 21-9
Configuring UNIX Syslog Servers 21-10
Logging Messages to a UNIX Syslog Daemon 21-10
Configuring the UNIX System Logging Facility 21-10
Displaying the Logging Configuration 21-12
CHAPTER 22 Troubleshooting 22-1
Checking the Top Panel Indicators 22-2
Checking Basic Settings 22-5
SSID 22-5
WEP Keys 22-5
Security Settings 22-5
Resetting to the Default Configuration 22-5
Using the MODE Button 22-6
Using the Web Browser Interface 22-6
Using the CLI 22-7
Reloading the Access Point Image 22-8
Using the MODE button 22-8
Using the Web Browser Interface 22-9
Browser HTTP Interface 22-9
Browser TFTP Interface 22-10
Using the CLI 22-10
Obtaining the Access Point Image File 22-12
Obtaining TFTP Server Software 22-12
APPENDIX A Channels and Antenna Settings A-1
Channels A-2
IEEE 802.11b (2.4-GHz Band) A-2
IEEE 802.11g (2.4-GHz Band) A-3
IEEE 802.11a (5-GHz Band) A-4
Maximum Power Levels and Antenna Gains A-5
IEEE 802.11b (2.4-GHz Band) A-5
IEEE 802.11g (2.4-GHz Band) A-6
IEEE 802.11a (5-GHz Band) A-7