Specifications

6-9
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-5260-01
Chapter 6 Configuring Radio Settings
Configuring Radio Channel Settings
Command Purpose
Step 1
configure terminal Enter global configuration mode.
Step 2
interface dot11radio { 0 | 1 } Enter interface configuration mode for the radio interface. The
2.4-GHz radio is radio 0, and the 5-GHz radio is radio 1.
Step 3
channel
frequency | least-congested
Set the default channel for the access point radio. To search for the
least-congested channel on startup, enter least-congested.
These are the available frequencies (in MHz) for the 2.4-GHz
radio:
• channel 1—2412 (Americas, EMEA, Japan, and China)
• channel 2—2417 (Americas, EMEA, Japan, and China)
• channel 3—2422 (Americas, EMEA, Japan, Israel, and China)
• channel 4—2427 (Americas, EMEA, Japan, Israel, and China)
• channel 5—2432 (Americas, EMEA, Japan, Israel, and China)
• channel 6—2437 (Americas, EMEA, Japan, Israel, and China)
• channel 7—2442 (Americas, EMEA, Japan, Israel, and China)
• channel 8—2447 (Americas, EMEA, Japan, Israel, and China)
• channel 9—2452 (Americas, EMEA, Japan, Israel, and China)
• channel 10—2457 (Americas, EMEA, Japan, and China)
• channel 11—2462 (Americas, EMEA, Japan, and China)
• channel 12—2467 (EMEA and Japan only)
• channel 13—2472 (EMEA and Japan only)
• channel 14—2484 (Japan only)
These are the available frequencies (in MHz) for the 5-GHz radio:
• channel 34—5170 (Japan only)
• channel 36—5180 (Americas and Singapore)
• channel 38—5190 (Japan only)
• channel 40—5200 (Americas and Singapore)
• channel 42—5210 (Japan only)
• channel 44—5220 (Americas and Singapore)
• channel 46—5230 (Japan only)
• channel 48—5240 (Americas and Singapore)
• channel 52—5260 (Americas and Taiwan)
• channel 56—5280 (Americas and Taiwan)
• channel 60—5300 (Americas and Taiwan)
• channel 64—5320 (Americas and Taiwan)
Note The frequencies allowed in your regulatory domain might
differ from the frequencies listed here.