User guide
Table Of Contents
- Cisco Aironet 600 Series OfficeExtend Access Point User Guide
- Unpacking the Cisco Aironet 600 Series OfficeExtend Access Point
- Cisco Aironet 600 Series OfficeExtend Access Point Placement
- Cisco Aironet 600 Series OfficeExtend Access Point Overview
- Installation Guidelines
- Understanding Cisco Aironet 600 Series OfficeExtend Access Point LEDs
- Accessing the Cisco Aironet 600 Series OfficeExtend Access Point GUI
- Configuring the Wireless LAN Controller IP Address on a Cisco Aironet 600 Series OfficeExtend Access Point
- Configuring Radio Channels on a Cisco Aironet 600 Series OfficeExtend Access Point
- Configuring Personal Wireless LANs
- Viewing the Event Log
- Accessing Online Help
- Troubleshooting
- Cisco Aironet 600 Series OfficeExtend Access Point Local Customer Interface
- Declarations of Conformity and Regulatory Information
- Open Source Used In Cisco Aironet 600 Series OfficeExtend Access Point
1-29
Cisco Aironet 600 Series OfficeExtend Access Point User Guide
Chapter 1 Cisco Aironet 600 Series OfficeExtend Access Point User Guide
Declarations of Conformity and Regulatory Information
This device complies with the EMC requirements (EN 60601-1-2) of the Medical Directive 93/42/EEC.
For 2.4 GHz radios, the following standards were applied:
• Radio: EN 300.328-1, EN 300.328-2
• EMC: EN 301.489-1, EN 301.489-17
• Safety: EN 60950
Note This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to
certain frequencies and/or may require a license for operation. For more details, contact Cisco Corporate
Compliance.