User guide

1-13
Cisco Aironet 600 Series OfficeExtend Access Point User Guide
Chapter 1 Cisco Aironet 600 Series OfficeExtend Access Point User Guide
Configuring Personal Wireless LANs
Step 4 From the Band Selection pulldown, choose the band, either 2.4 GHz or 5.0 GHz. You can duplicate the
configuration on both bands, or have different settings on each band.
Step 5 Check the Enabled check box to enable this wireless connection. The default value is Disabled.
Step 6 Check the Broadcast check box to broadcast the SSID over the air. The default value is unchecked.
Step 7 In the SSID field, enter the personal SSID that you want to assign to this access point. This SSID will
be locally switched. The default SSID is AIR-602 for both radios.
Note Your personal SSID Wireless LAN and your company SSID Wireless LAN are different. When
you configure your personal Wireless LAN, use an SSID name that is different from your
company’s SSID to help avoid confusion.
Step 8 From the Security drop-down boxes, enter the authentication type, encryption type, and passphrase. It is
suggested that you select WPA2-PSK and AES encryption.
Step 9 Click Apply to commit your changes.
Step 10 The screen will switch to a verification screen. Click Continue when it appears.