User guide
Table Of Contents
- Cisco Aironet 600 Series OfficeExtend Access Point User Guide
- Unpacking the Cisco Aironet 600 Series OfficeExtend Access Point
- Cisco Aironet 600 Series OfficeExtend Access Point Placement
- Cisco Aironet 600 Series OfficeExtend Access Point Overview
- Installation Guidelines
- Understanding Cisco Aironet 600 Series OfficeExtend Access Point LEDs
- Accessing the Cisco Aironet 600 Series OfficeExtend Access Point GUI
- Configuring the Wireless LAN Controller IP Address on a Cisco Aironet 600 Series OfficeExtend Access Point
- Configuring Radio Channels on a Cisco Aironet 600 Series OfficeExtend Access Point
- Configuring Personal Wireless LANs
- Viewing the Event Log
- Accessing Online Help
- Troubleshooting
- Cisco Aironet 600 Series OfficeExtend Access Point Local Customer Interface
- Declarations of Conformity and Regulatory Information
- Open Source Used In Cisco Aironet 600 Series OfficeExtend Access Point
1-9
Cisco Aironet 600 Series OfficeExtend Access Point User Guide
Chapter 1 Cisco Aironet 600 Series OfficeExtend Access Point User Guide
Configuring the Wireless LAN Controller IP Address on a Cisco Aironet 600 Series OfficeExtend Access Point
Step 3 From the Home Summary page, click Configuration to open the Configuration page.
Step 4 Click the WA N tab to open the Configure WAN page.
Step 5 Enter the IP address of the primary controller in the Primary Controller IP Address field.
Step 6 Leave the Static IP check box unchecked to allow the WAN IP address to be assigned by DHCP.
Step 7 Click Apply to commit your changes.