Product specifications
Table Of Contents
- Passus data_sheet_c78-722607.pdf
- Passus data_sheet_c78-720918.pdf
- Cisco Catalyst 3850 Series Switches
- Product Overview
- Switch Configurations
- Network Modules
- Dual Redundant Modular Power Supplies
- Power over Ethernet Plus (PoE+)
- Cisco Universal Power over Ethernet (UPOE)
- Benefits
- Flexible NetFlow (FNF)
- QoS
- Security
- Resiliency
- Software Features and Services on Cisco Catalyst 3850 Series Switches
- Ease of Operations
- Advanced Security Features
- Resiliency
- Application Visibility and Control Using Flexible NetFlow
- Deployment Options
- Cisco Catalyst 3850 Series Specifications
- Dimensions, Weight, Acoustic, Mean Time Between Failure, and Environmental Range Specifications for Cisco Catalyst 3850 Serie
- Connectors for Cisco Catalyst 3850 Series
- Management and Standards Support for Cisco Catalyst 3850 Series Switches
- Power Supply Specifications
- Power Consumption of Standalone Cisco Catalyst 3850 Series Switches
- Safety and Compliance
- Cisco Enhanced Limited Lifetime Hardware Warranty
- Licensing for Cisco Catalyst 3850 Series Switches
- Software Policy for Cisco Catalyst 3850 Series Switches
- Cisco and Partner Services for Next-Generation Cisco Catalyst Fixed Switches
- Ordering Information
- Optics Compatibility Information
- Cisco Catalyst 3850 Series Switches
- Passus data_sheet_c78-729421.pdf
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 9 of 10
Item Specification
Input power
requirements
●
AP3700: 44 to 57 VDC
●
Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz
Power draw
●
AP3700: 15W
Note: When deployed using a Power over Ethernet (PoE) specification, the power drawn from the power sourcing
equipment will be higher by some amount dependent on the length of the interconnecting cable.
Powering options Aironet 3700 without an add-on module
●
802.3at PoE+
●
Enhanced PoE
●
Cisco AP3700 power injectors (AIR-PWRINJ4=)
●
Cisco AP3700 local power supply (AIR-PWR-B=)
Note: If 802.3af PoE is the source of power, the access point will dynamically shift from 4x4 to 3x3 and come up under PoE.
Aironet 3700 with an add-on module
●
802.3at PoE+
●
Enhanced PoE
●
Cisco AP3700 power injectors (AIR-PWRINJ4=)
●
Cisco AP3700 local power supply (AIR-PWR-B=)
Note: If 802.3af PoE is the source of power, the access point with module will dynamically shift from 4x4 to 2x2 and come
up under PoE.
Warranty Limited lifetime hardware warranty
Compliance
standards
UL 60950-1
CAN/CSA-C22.2 No. 60950-1
UL 2043
IEC 60950-1
EN 60950-1
EN 50155
●
Radio approvals:
FCC Part 15.247, 15.407
RSS-210 (Canada)
EN 300.328, EN 301.893 (Europe)
ARIB-STD 66 (Japan)
ARIB-STD T71 (Japan)
EMI and susceptibility (Class B)
FCC Part 15.107 and 15.109
ICES-003 (Canada)
VCCI (Japan)
EN 301.489-1 and -17 (Europe)
EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC
●
IEEE standards:
IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d
IEEE 802.11ac Draft 5
●
Security:
802.11i, Wi-Fi Protected Access 2 (WPA2), WPA
802.1X
Advanced Encryption Standards (AES), Temporal Key Integrity Protocol (TKIP)
●
Extensible Authentication Protocol (EAP) types:
EAP-Transport Layer Security (TLS)
EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2)
Protected EAP (PEAP) v0 or EAP-MSCHAPv2
EAP-Flexible Authentication via Secure Tunneling (FAST)
PEAP v1 or EAP-Generic Token Card (GTC)
EAP-Subscriber Identity Module (SIM)
●
Multimedia:
Wi-Fi Multimedia (WMM)
●
Other:
FCC Bulletin OET-65C
RSS-102