User guide

2-15
Table 2-2 Cisco Aironet 340 Series Access Point Specifications
Feature
Encryption
Power
Requirements
Antenna
Optional Antenna
Connector
Maximum Clients
Range at 1 Mbps
(typical)
Range at 11 Mbps
(typical)
Network Protocols
Supported
LED Indicators
Local
Configuration
Remote
Configuration
Automatic
Configuration
Receive
Sensitivity
Output Power
Power
Consumption
SNMP Compliance
Certifications
Operating
Temperature
Humidity (non-
condensing)
Dimensions
Weight
AIR-AP341S1C
40-bit WEP
110-120V/220-240V
Integrated single
2.2 dBi dipole (no
antenna diversity)
10
AIR-AP342E2C
128-bit WEP
110-120V
AIR-AP341E2C
40-bit WEP
110-120V/220-240V
AIR-AP342E2R
128-bit WEP
110-120V
AIR-AP341E2R
40-bit WEP
110-120V/220-240V
Complies with IEEE 802.3
Status, network activity and RF Activity
Direct console port (serial EIA-232 DB-9 female)
HTTP, Telnet, FTP, or SNMP
-90dBm @ 1 Mbps, -88dBm @ 2 Mbps, -87dBm @ 5.5 Mbps, -83dBm @ 11 Mbps
30 mW (U.S., Canada, ETSI) 4.5 mW/MHz (EIRP, Japan)
FCC Class A, FCC Part 15.247, Canada ICES Class B, CE, UL, CSA;
Call for other information outside the U.S.
32° to 131° F (0 to 55° C)
6.3 x 4.72 x 1.45 in. (16 x 12 x 3.68 cm)
12.3 oz. (350g), excluding power supply
MIB I, MIB II
10 to 90%
1300 ft. (400m) open environment; 250 ft (77m) office
1500 ft. (460m) open environment;
300 ft (90m) office
300 ft. (90m) open environment; 80 ft (25m) office
400 ft. (120m) open environment;
100 ft (30m) office
Integrated (nonremovable)
dual 2.2 dBi dipole with diversity support
Optional (none supplied with unit)
Dual RP-TNC connectors
with diversity support
2048
None
5V±5% @ 800 mA
BOOTP and DHCP