User guide

1-10 Quick Start Instructions for Access Point and PC Card Client Adapter
Test
To test that your Access Point and PC Card Client Adapter are properly configured, follow these steps:
Step 1. Open your Web browser. We recommend using Microsoft Internet Explorer or Netscape Navigator,
versions 4.0 or later.
Step 2. Type the Access Point IP address from the previous section in the browser address line and press Enter.
Depending on the method used to assign the IP address, either the Summary Status Web page or the
Express Setup Web page opens.
Figure 1-6 Summary Status and Express Setup Web Pages
Congratulations!Youhave now createda wireless LANusing Cisco Aironet340 Series AccessPoint and PCCard
Client Adapter.