System information

Password Recovery Procedure for the Cisco
Aironet Equipment
Document ID: 9215
You need a valid Cisco.com account in order to download Cisco Aironet
drivers, firmware, and utilities (
registered customers only
) . If you do not have
a Cisco.com account, register for free at the Cisco.com Registration
page.
Introduction
Prerequisites
Requirements
Conventions
Access Point
Determine the OS
Connect to the AP
Reset the APVxWorks Versions That Are Earlier Than 11.07
Reset the APVxWorks Version 11.07 or Later
Reset the APCisco IOS Software
Reset the APAP 350 That Runs Cisco IOS Software
Base Station
Set Defaults with the Reset Button
Client Adapters
SSID
Set Defaults
CEM Password
WEP Keys
Aironet 1410 Series Bridge
Aironet 1310 Series Bridge
Aironet 350 Series Bridge
For Software Version 11.xx or Later
Aironet 340 Series Bridge
For Software Version 8.65 or Later
For Software Versions That Are Earlier Than 8.65
Workgroup Bridge
Set Defaults with the Reset Button
NetPro Discussion Forums − Featured Conversations
Related Information
Introduction
This document describes how to recover a password or to restore the default settings on various Cisco Aironet
Wireless LAN (WLAN) equipment.
Note: Unlike other Cisco platforms, the Aironet hardware and software do not allow password recovery. You
must instead return the equipment to its default state, from which it can be reconfigured.
Cisco − Password Recovery Procedure for the Cisco Aironet Equipment