System information

ap: flash_init
Initializing Flash...
flashfs[0]: 142 files, 6 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7612416
flashfs[0]: Bytes used: 3407360
flashfs[0]: Bytes available: 4205056
flashfs[0]: flashfs fsck took 0 seconds.
...done initializing Flash.
Issue the dir flash: command in order to view the contents of Flash, and find the config.txt
configuration file.
ap: dir flash:
Directory of flash:/
3 −rwx 223 <date> env_vars
4 −rwx 2190 <date> config.txt
5 −rwx 27 <date> private−config
150 drwx 320 <date> c350−k9w7−mx.122−13.JA
4207616 bytes available (3404800 bytes used)
4.
Rename the config.txt file to config.old.
ap: rename flash:config.txt flash:config.old
5.
Issue the reset command in order to reboot the 350.
ap: reset
Are you sure you want to reset the system (y/n)?y
System resetting..Xmodem file system is available.
flashfs[0]: 142 files, 6 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7612416
flashfs[0]: Bytes used: 3407360
flashfs[0]: Bytes available: 4205056
flashfs[0]: flashfs fsck took 0 seconds.
Reading cookie from flash parameter block...done.
Base ethernet MAC Address: 00:40:96:41:e4:df
Loading "flash:/c350−k9w7−mx.122−13.JA/c350−k9w7−mx.122−13.JA"...########
Note: The AP is configured with the factory default values that include:
The IP address, which is set to receive an IP address with DHCP♦
The default username and password, "Cisco"♦
6.
After the full Cisco IOS Software is loaded and connectivity is reestablished, delete the config.old file
from Flash.
Issue the del flash:config.old Cisco IOS Software command at an enabled prompt from the CLI.
ap#del flash:config.old
Delete filename [config.old]
Delete flash:config.old [confirm]
ap#
7.
Cisco − Password Recovery Procedure for the Cisco Aironet Equipment