Specifications

Chapter 3 Configuring the Radio and Basic Settings
Radio Configuration
3-20
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Follow this link path to reach the AP Radio Advanced page:
1. On the Summary Status page, click Setup.
2. On the Setup page, click Advanced in the AP Radio row under Network
Ports.
Settings on the AP Radio Advanced Page
The AP Radio Advanced page contains the following settings:
• Requested Status
• Current Status
• Packet Forwarding
• Forwarding State
• Default Multicast Address Filters
• Maximum Multicast Packets/Second
• Radio Cell Role
• SSID for use by Infrastructure Stations (such as Repeaters)
• Disallow Infrastructure Stations on any other SSID
• Use Aironet Extensions
• Classify Workgroup Bridges as Network Infrastructure
• Require Use of Radio Firmware x.xx
• Ethernet Encapsulation Transform
• Quality of Service Setup Link
• VLAN Setup Link
• Enhanced MIC verification for WEP
• Temporal Key Integrity Protocol
• Broadcast WEP Key rotation interval (sec)
• Advanced Primary SSID Setup
• Specified Access Points
• Radio Modulation
• Radio Preamble