Specifications

3-9
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Chapter 3 Configuring the Radio and Basic Settings
Radio Configuration
Figure 3-4 The AP Radio Identification Page
Follow this link path to reach the AP Radio Identification page:
1. On the Summary Status page, click Setup.
2. On the Setup page, click Identification in the AP Radio row under Network
Ports.
Settings on the AP Radio Identification Page
The AP Radio Identification page contains the following settings:
• Primary Port Settings
• Default IP Address
• Default IP Subnet Mask
• Service Set ID (SSID)
• LEAP User Name
• LEAP Password
The page also displays the access point’s MAC address, its current IP address, its
current IP subnet mask, its maximum packet data length, its firmware version, and
its boot block version.