Specifications

2-25
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Chapter 2 Using the Management Interfaces
Using SNMP
Use the SNMP Setup page to enter detailed SNMP settings, such as the SNMP
trap destination. See the “SNMP Setup” section on page 11-2 for details on the
SNMP Setup page.
Supported MIBs
The access point supports the following MIBs:
• AWC-VLAN--MIB.mib
• IEEE802_11Draft6.mib
• AwcVx .mi b
These MIBs are bundled in a compressed executable file available on the Software
Center at Cisco.com. Follow these steps to download these MIBs:
Step 1 Browse to http://www.cisco.com.
Step 2 Click the Software Center link. The Software Center home page appears.
Step 3 Click Wireless Software. The Wireless Software page appears.
Step 4 Scroll to the Cisco Aironet Access Point Firmware and Utilities section and click
Cisco Aironet 350 Series. The Software Download page appears.
Step 5 Click the MIB-AP350vxxxxxx.exe file for the firmware version your access point
is running. The Software License Agreement appears.
Step 6 Review the license agreement and then click Accept. The Software Download
page for the file you selected appears.
Step 7 Click Download: MIB-AP450Vxxxxxx.exe to begin downloading the file.
Step 8 Follow the directions on your screen.
You can view and download SNMP and MIB related files on the software center
at the following link:
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml