Specifications

Chapter 13 Diagnostics and Troubleshooting
Resetting to the Default Configuration
13-50
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Step 13 Copy the installation key back to the configuration memory bank by pressing c to
select Copy file, then 2 to select Config, then the selection letter for the file AP
Installation Key.
Step 14 If you copied a VAR installation key to DRAM in Step 11, copy it back to the
configuration memory bank by pressing c to select Copy file, then 2 to select
Config, then the selection letter for the file VAR Installation Key. If the access
point does not have a VAR installation key file, skip to Step 15.
Step 15 Run the access point firmware by pressing r to select Run, then the selection
letter for the firmware file that is displayed. The message “Inflating [firmware
file name]” appears while the access point starts the firmware.
Step 16 When the Express Setup screen appears, begin reconfiguring the access point
using the terminal emulator or an Internet browser.