Specifications

13-37
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Chapter 13 Diagnostics and Troubleshooting
Checking the Top Panel Indicators
00 4a 40 81 00 40 96 36 14 5a 00 01 64 43 ef 41 01 7f 00 04 5f 00 00 40 96 40 6f e6 00 00
00 00 00 00 00 00 00 00 0a 54 8b a4 00 00 44 57 49 4c 4c 2d 49 42 4d 2d 57 32 4b 00 00 00
00 00 00 00 00 00 |.J@..@.6.Z..dC.A..._..@.@o............T....JCOOL-IBM-W2K.........|
===End of AP_North Detailed Trace Log===
Packets Displayed on the CLI
To view packets displayed on the access point CLI, follow the instructions in the
“Using the Command-Line Interface” section on page 2-5 to open the CLI. The
access point displays the packets at the bottom of the screen.
Checking the Top Panel Indicators
If your access point is not communicating, check the three indicators on the top
panel. The indicators report the unit’s status. Figure 13-11 shows the indicators
on an access point with a plastic case, and Figure 13-12 shows the indicators on
an access point with a metal case. Table 13-3 lists the meanings of the indicator
signals.
Figure 13-11 Indicator Lights on Access Point with Plastic Case
S
CISCO AIRONET 350 SERIES
WIRELESS ACCESS POINT
Ethernet
Status
Radio
49075