Specifications

13-23
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Chapter 13 Diagnostics and Troubleshooting
Using Command-Line Diagnostics
• Flags—see Table 13-2 for a list of flags
• Refcnt—the number of hosts referencing this address
• Use—number of packets forwarded
• Interface—one of four possible interfaces:
– emac0 for Ethernet
– awc0 for internal radio
– awc1 for external radio
– lo0 for internal loopback
Table 13-2 Flag Definitions
Flag Value Definition
0x1 Route is usable.
0x2 Destination is a gateway.
0x4 Host of specific routing entry.
0x8 Host or net is unreachable.
0x10 Created dynamically (by redirect).
0x20 Modified dynamically (by redirect).
0x40 Message confirmed.
0x80 Subnet mask is present.
0x100 Generate new routes on use.
0x200 External daemon resolves name.
0x400 Generated by ARP.
0x800 Manually added (static).
0x1000 Just discard packets (during updates).
0x2000 Modified by management protocol.
0x4000 Protocol-specific routing flag.
0x8000 Protocol-specific routing flag.