Specifications

Chapter 10 Managing Firmware and Configurations
Distributing Firmware
10-10
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Figure 10-7 Distribute Firmware Page
Follow this link path in the browser interface to reach the Distribute Firmware
page:
1. On the Summary Status page, click Setup.
2. On the Setup page, click Cisco Services Setup.
3. On the Cisco Services page, click Distribute Firmware to other Cisco
Devices.
Follow these steps to distribute firmware to other access points:
Step 1 Follow the link path to reach the Distribute Firmware page.
Step 2 To distribute all three firmware components at once, verify that yes is selected for
Distribute All Firmware. This is the default setup for the Distribute Firmware
page.
To distribute the firmware components individually, select no for Distribute All
Firmware, and click the checkboxes for the components you want to distribute.
Step 3 Click Start. The access point’s firmware is distributed to the access points on
your network. To cancel the distribution, click Abort.
When the distribution is complete, the access points that received the firmware
automatically reboot.