Specifications

Chapter 9 Network Management
Enabling Wireless Network Accounting
9-20
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Acct-Output-Packets The number of packets sent on the wireless network
through the access point since the client device
associated to the access point. The access point sends
this attribute only with the ACCT_STOP and
ACCT_UPDATE status types.
Acct-Terminate-Cause How the client device’s session was terminated. This
attribute lists the same cause for every disassociated
client device: Loss of service. The access point sends
this attribute only with the ACCT_STOP status type.
Acct-Delay-Time The delay between the time the event occurred and the
time that the attribute was sent to the server. The access
point sends this attribute to the server with all three
status types.
RADIUS_IPADR The IP address of the access point sending the
accounting information. The access point sends this
attribute to the server with all three status types.
Table 9-1 Accounting Attributes the Access Point Sends to the Accounting
Server (continued)
Attribute Definition