Specifications

9-19
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Chapter 9 Network Management
Enabling Wireless Network Accounting
NAS-Port The port number used for the client device’s
connection. The access point sends this attribute to the
server with all three status types.
Acct-Authentic The method with which the client device is
authenticated to the network. This value is always 1,
which represents RADIUS authentication. The access
point sends this attribute to the server with all three
status types.
NAS-Identifier The network access server (NAS) sending the
accounting data; for wireless networks, the name of the
access point sending the accounting information. The
access point sends this attribute to the server with all
three status types.
Acct-Session-Time The elapsed time in seconds that the client device has
been associated to the access point. The access point
sends this attribute only with the ACCT_STOP and
ACCT_UPDATE status types.
Acct-Input-Octets The number of octets received on the wireless network
through the access point since the client device
associated to the access point. The access point sends
this attribute only with the ACCT_STOP and
ACCT_UPDATE status types.
Acct-Output-Octets The number of octets sent on the wireless network
through the access point since the client device
associated to the access point. The access point sends
this attribute only with the ACCT_STOP and
ACCT_UPDATE status types.
Acct-Input-Packets The number of packets received on the wireless
network through the access point since the client device
associated to the access point. The access point sends
this attribute only with the ACCT_STOP and
ACCT_UPDATE status types.
Table 9-1 Accounting Attributes the Access Point Sends to the Accounting
Server (continued)
Attribute Definition