Specifications

8-37
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Chapter 8 Security Setup
Summary of Settings for Authentication Types
Summary of Settings for Authentication Types
Table 8-5 lists the access point settings required to enable each authentication
type and combinations of authentication types.
Table 8-5 Settings for Authentication Types
Authentication Types Required Settings
LEAP On the Authenticator Configuration page (shown in Figure 8-13):
• Select an 802.1X protocol draft that matches the protocol draft used by
client devices that associate with the access point.
• Enter the name or IP address, type, port, shared secret, and timeout
value for your RADIUS server.
• Select the EAP checkbox under the server.
On the AP Radio Data Encryption page (shown in Figure 8-6):
• Select the Network-EAP checkbox.
• Enter a WEP key in key slot 1 and select 128-bit from the key size
menu.
LEAP and static WEP
under 802.11 Open
• Enter all the settings for LEAP authentication.
On the AP Radio Data Encryption page (shown in Figure 8-6):
• Select the Open checkbox.