Specifications

8-33
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Chapter 8 Security Setup
Setting Up MAC-Based Authentication
Figure 8-12 AP Radio Advanced Page
Step 15
Select Disallowed from the pull-down menu for Default Unicast Address Filter
for each authentication type requiring MAC-based authentication.
For example, if the access point is configured for both open and Network-EAP
authentication, you could set Default Unicast Address Filter under Open to
Disallowed but leave Default Unicast Address Filter under Network-EAP set to
Allowed. This configuration forces client devices using open authentication to
authenticate using MAC addresses but does not force LEAP-enabled client