Specifications

Chapter 8 Security Setup
Setting Up EAP Authentication
8-20
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Setting Up EAP Authentication
During EAP authentication, the access point relays authentication messages
between the RADIUS server on your network and the authenticating client device.
This section provides instructions for:
• Enabling EAP on the Access Point
• Enabling EAP in Cisco Secure ACS
• Setting up a Repeater Access Point as a LEAP Client
Enabling EAP on the Access Point
You use the Authenticator Configuration page and the AP Radio Data Encryption
page to set up and enable EAP authentication. Figure 8-6 shows the AP Radio
Data Encryption page. Figure 8-8 shows the Authenticator Configuration page.
Figure 8-8 Authenticator Configuration Page