Specifications

7-25
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Chapter 7 Configuring Other Settings
Event Notification Setup
Settings on the Event Notifications Setup Page
The Event Notifications Setup page contains the following settings:
• Should Notify-Disposition Events generate SNMP Traps?
• SNMP Trap Destination
• SNMP Trap Community
• Should Notify-Disposition Events generate Syslog Messages?
• Should Syslog Messages use the Cisco EMBLEM Format
• Syslog Destination Address
• Syslog Facility Number
• IEEE SNMP Traps Should Generate the Following Notifications
The page also displays the IP address of the network default syslog destination.
Should Notify-Disposition Events generate SNMP Traps?
Select yes to send event notifications to an SNMP server.
Note For notifications to be sent to an SNMP server, SNMP must be enabled on the SNMP Setup page, and
you must set an SNMP trap destination and an SNMP trap community.
SNMP Trap Destination
Type the IP address or the host name of the server running the SNMP Management software. This setting
also appears on the SNMP Setup page.
SNMP Trap Community
Type the SNMP community name. This setting also appears on the SNMP Setup page.
Should Notify-Disposition Events generate Syslog Messages?
Select yes to send event notifications to a Syslog server.
Should Syslog Messages use the Cisco EMBLEM Format
When this setting is enabled, the access point generates EMBLEM (Baseline Manageability
Specification) standard compliant system log messages:
ipadress Counter: [yyy mmm dd hh:mm:ss TimeZone +/– hh:mm]: %FACILTY- SEVERITY-MNEMONIC:
Message-text
Example without timestamp:
192.168.12.83: %APBR-6-STA_ASSOC_OK: [AP350-12] Station [TEST-LPT]000750abcd2a Associated