Specifications

7-19
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Chapter 7 Configuring Other Settings
Event Notification Setup
Follow this link path to reach the Event Display Setup page:
1. On the Summary Status page, click Setup.
2. On the Setup page, click Display Defaults under Event Log.
Settings on the Event Display Setup Page
The Event Display Setup page contains the following settings:
• How should time generally be displayed?
• How should Event Elapsed (non-wall-clock) Time be displayed?
• Severity Level at which to display events
How should time generally be displayed?
You use this drop-down menu to determine whether the events in the Event Log are displayed as system
uptime or wall-clock time. If you select system uptime, the events are displayed either since the boot or
since the last time the Event Log was displayed. If you select wall-clock time, the events are displayed
in a YY:MM:DD HH:MM:SS format. If time has not been set on the access point (either manually or by
a time server), the time display appears as uptime regardless of this selection.
How should Event Elapsed (non-wall-clock) Time be displayed?
Choose to display event time since the last boot-up of the access point or the time that has elapsed since
the event occurred.