Specifications

7-15
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Chapter 7 Configuring Other Settings
Association Table Display Setup
Packets To/From Station
Use these settings to display packet volume information in the Association Table. Select Total to display
the total number of packets to and from each station on the network.
Select Alert to display the number of alert packets to and from each station on the network for which
you have activated alert monitoring. Select the Alert checkbox on a device’s Station page to activate alert
monitoring for that device. See the “Using Station Pages” section on page 9-3 for details on Station
pages.
The Total and Alert selections both add a column to the Association Table.
Bytes To/From Station
Use these settings to display byte volume information in the Association Table. Select Total to display
the total number of bytes to and from each station on your wireless network. Select Alert to display the
number of alert bytes to and from each station on the wireless network. Both selections add a column to
the Association Table.
Primary Sort
This setting determines the information that appears in the first column in the Association Table.
Secondary Sort
This setting determines the information that appears in the second column in the Association Table.