Specifications

7-12
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Chapter 7 Configuring Other Settings
Routing Setup
Figure 7-6 Routing Setup Page
Follow this link path to reach the Routing Setup page:
1. On the Summary Status page, click Setup.
2. On the Setup page, click Routing under Services.
Entering Routing Settings
The Routing Setup page contains the following settings:
• Default Gateway
• New Network Route Settings
• Installed Network Routes List
Default Gateway
Enter the IP address of your network’s default gateway in this entry field. The entry 255.255.255.255
indicates no gateway.
New Network Route Settings
You can define additional network routes for the access point. To add a route to the installed list, fill in
the three entry fields and click Add. To remove a route from the list, highlight the route and click
Remove. The three entry fields include:
• Dest Network—Enter the IP address of the destination network.
• Gateway—Enter the IP address of the gateway used to reach the destination network.
• Subnet Mask—Enter the subnet mask associated with the destination network.