Specifications

7-11
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Chapter 7 Configuring Other Settings
Routing Setup
Follow this link path to reach the FTP Setup page:
• On the Summary Status page, click Setup
• On the Setup page, click FTP under Services.
Settings on the FTP Setup Page
The FTP Setup page contains the following settings:
• File Transfer Protocol
• Default File Server
• FTP Directory
• FTP User Name
• FTP User Password
File Transfer Protocol
Use the drop-down menu to select FTP or TFTP (Trivial File Transfer Protocol). TFTP is a relatively
slow, low-security protocol that requires no username or password.
Default File Server
Enter the IP address or DNS name of the file server where the access point should look for FTP files.
FTP Directory
Enter the file server directory that contains the firmware image files.
FTP User Name
Enter the username assigned to your FTP server. You don’t need to enter a name in this field if you select
TFTP as the file transfer protocol.
FTP User Password
Enter the password associated with the file server’s username. You don’t need to enter a password in this
field if you select TFTP as the file transfer protocol.
Routing Setup
You use the Routing Setup page to configure the access point to communicate with the IP network
routing system. You use the page settings to specify the default gateway and to build a list of installed
network route settings. Figure 7-6 shows the Routing Setup page.