Specifications

7-7
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Chapter 7 Configuring Other Settings
Server Setup
DHCP Client Identifier Value
Use this setting to include a unique identifier in the access point’s DHCP request packet. This field
contains the access point’s MAC address by default. If you select Other - Non Hardware from the
DHCP Client Identifier Type drop-down menu, you can enter up to 255 alphanumeric characters. If you
select any other option from the DHCP Client Identifier Type drop-down menu, you can enter up to 12
hexadecimal characters. Hexadecimal characters include the numbers 0 through 9 and the letters A
through F.
DHCP Class Identifier
Your DHCP server can be set up to send responses according to the group to which a device belongs.
Use this field to enter the access point’s group name. The DHCP server uses the group name to determine
the response to send to the access point. The access point’s DHCP class identifier is a vendor class
identifier.
Entering Web Server Settings and Setting Up Access Point Help
You use the Web Server Setup page to enable browsing to the web-based management system, specify
the location of the access point Help files, and enter settings for a custom-tailored web system for access
point management. Figure 7-3 shows the Web Server Setup page:
Figure 7-3 Web Server Setup Page
Follow this link path to reach the Web Server Setup page:
1. On the Summary Status page, click Setup.
2. On the Setup page, click Web Server under Services.