Specifications

7-4
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Chapter 7 Configuring Other Settings
Server Setup
Entering Boot Server Settings
You use the Boot Server Setup page to configure the access point for your network's BOOTP or DHCP
servers for automatic assignment of IP addresses. Figure 7-2 shows the Boot Server Setup page:
Figure 7-2 Boot Server Setup Page
Follow this link path to reach the Boot Server Setup page:
1. On the Summary Status page, click Setup.
2. On the Setup page, click Boot Server under Services.
Settings on the Boot Server Setup Page
The Boot Server Setup page contains the following settings:
• Configuration Server Protocol
• Use Previous Configuration Server Settings
• Read .ini File from File Server
• BOOTP Server Timeout (sec)
• DHCP Multiple-Offer Timeout (sec)
• DHCP Requested Lease Duration (min)
• DHCP Minimum Lease Duration (min)
• DHCP Client Identifier Type
• DHCP Client Identifier Value
• DHCP Class Identifier
The page also shows the IP address of the current boot server and specified “.ini” file server.